Difference between revisions of "Trim Controller"
Jump to navigation
Jump to search
(Created page with "Trim system controller is based on this board: https://www.rugged-circuits.com/microcontroller-boards/ruggeduino-smalls-tcrmx Which has the same pinout of this board: Fil...") |
|||
| (9 intermediate revisions by the same user not shown) | |||
| Line 1: | Line 1: | ||
| − | + | =Possible configurations= | |
| − | + | * Input pins: 24, 11, 23, 10 | |
| + | * Input pins with external pull up: 9, 22 | ||
| − | + | ==Button combos== | |
| − | + | ===Single or dual elevator trim with neutral and trim wheel=== | |
| + | * Pilot and co-pilot: UP pin 24 | ||
| + | * Pilot and co-pilot: Down pin 11 | ||
| + | * Pilot and co-pilot: Neutral pin 23 | ||
| + | * Trim wheel: pin 9 and 22 | ||
| − | + | ===Single or dual elevator trim with neutral and trim wheel and speed sense=== | |
| + | * Pilot and co-pilot: UP pin 24 | ||
| + | * Pilot and co-pilot: Down pin 11 | ||
| + | * Pilot and co-pilot: Neutral pin 23 | ||
| + | * Trim wheel: pin 9 and 22 | ||
| + | * Speed sensor: pin 10 | ||
| + | |||
| + | ===Single Elevator and Single rudder/aileron trim with neutral=== | ||
| + | * Pilot and co-pilot: UP pin 24 | ||
| + | * Pilot and co-pilot: Down pin 11 | ||
| + | * Pilot and co-pilot: Neutral pin 23 | ||
| + | * Pilot and co-pilot: Rudder or aileron up pin 9 (requires external pull up resistor) | ||
| + | * Pilot and co-pilot: Rudder or aileron down pin 22 (requires external pull up resistor) | ||
| + | * Pilot and co-pilot: Rudder or aileron neutral pin 10 | ||
| + | |||
| + | ===Single Elevator with neutral and Single rudder/aileron with speed sense=== | ||
| + | * Pilot and co-pilot: UP pin 24 | ||
| + | * Pilot and co-pilot: Down pin 11 | ||
| + | * Pilot and co-pilot: Neutral pin 23 | ||
| + | * Pilot and co-pilot: Rudder or aileron up pin 9 (requires external pull up resistor) | ||
| + | * Pilot and co-pilot: Rudder or aileron down pin 22 (requires external pull up resistor) | ||
| + | * Speed sensor: pin 10 | ||
| + | |||
| + | ===Fixed=== | ||
| + | * Master warning: pin 21 | ||
| + | * Master caution: pin 8 | ||
| + | * Autopilot input: pin 7 and 20 | ||
| + | * Analog output for trim position: pin 6 and 19 | ||
| + | * Trim A sense and power: pin 1, 14, 2, 15, and 16 | ||
| + | * Trim B sense and power: pin 3, 4, 5, 17, and 18 | ||
Latest revision as of 20:12, 27 January 2024
Possible configurations
- Input pins: 24, 11, 23, 10
- Input pins with external pull up: 9, 22
Button combos
Single or dual elevator trim with neutral and trim wheel
- Pilot and co-pilot: UP pin 24
- Pilot and co-pilot: Down pin 11
- Pilot and co-pilot: Neutral pin 23
- Trim wheel: pin 9 and 22
Single or dual elevator trim with neutral and trim wheel and speed sense
- Pilot and co-pilot: UP pin 24
- Pilot and co-pilot: Down pin 11
- Pilot and co-pilot: Neutral pin 23
- Trim wheel: pin 9 and 22
- Speed sensor: pin 10
Single Elevator and Single rudder/aileron trim with neutral
- Pilot and co-pilot: UP pin 24
- Pilot and co-pilot: Down pin 11
- Pilot and co-pilot: Neutral pin 23
- Pilot and co-pilot: Rudder or aileron up pin 9 (requires external pull up resistor)
- Pilot and co-pilot: Rudder or aileron down pin 22 (requires external pull up resistor)
- Pilot and co-pilot: Rudder or aileron neutral pin 10
Single Elevator with neutral and Single rudder/aileron with speed sense
- Pilot and co-pilot: UP pin 24
- Pilot and co-pilot: Down pin 11
- Pilot and co-pilot: Neutral pin 23
- Pilot and co-pilot: Rudder or aileron up pin 9 (requires external pull up resistor)
- Pilot and co-pilot: Rudder or aileron down pin 22 (requires external pull up resistor)
- Speed sensor: pin 10
Fixed
- Master warning: pin 21
- Master caution: pin 8
- Autopilot input: pin 7 and 20
- Analog output for trim position: pin 6 and 19
- Trim A sense and power: pin 1, 14, 2, 15, and 16
- Trim B sense and power: pin 3, 4, 5, 17, and 18
